Custom Wool Felt Sauna Hat Wholesale – Bell Shape with Hanging Loop

Bell-shaped wool felt sauna hats for banya venues, spa hotels, wellness retreats, onsen and hammam operators, and sauna retailers. The shell is pressed as one piece, so there is no crown seam to press against the head; the hem is cut with pinking shears instead of being bound, and a punched hole line above it lets steam out. A felt loop at the top means the hat can hang on a hook between sessions instead of sitting wet on a bench. Custom logo, from 100 pcs per colour.

• One-piece bell, no crown seam — pressed in a single mould rather than cut from panels, so nothing hard sits on the top of the head when you lean back on the bench. The bell drops over the ears, which covers a wider band of skin than a close-fitting beanie.
• 100% wool felt, 3 mm — dense enough to hold its shape through repeated steaming and thick enough to keep insulating once damp. No synthetic blend, so the hat can go from a 90 °C room to a cold rinse without warping.
• Pinked hem, unbound — the edge is cut with a zigzag blade, a finish that stops the felt fraying without a stitched or taped binding. Nothing stiff touches the neck, and there is no tape to peel after a few months of steam.
• Punched vent line — a ring of holes sits just above the hem, giving the trapped heat somewhere to escape instead of condensing at the brow. It also breaks up the plain dome, so a logo-free hat still reads as a finished product on a shelf.
• Hanging loop at the crown — a felt loop sewn into the top, so the hat hangs on a wall hook in the changing room and dries off the floor. For venues this is the difference between a hat that lasts a season and one that mildews in a basket.
• One size, up to 61 cm — the felt shell has enough give to fit most adult heads. Two-size grading (56–58 / 59–61 cm) is available from 300 pcs for venues that issue hats by size.
• Custom logo — felt patch, debossed leather patch, embroidery or screen print, on the front or the side. Samples in 5–7 days, bulk in 15–25 days.

Specifications

What you can change

• Colour — cream, oatmeal, charcoal and taupe in stock; Pantone-matched dyeing from 300 pcs per shade.
• Logo — felt patch, debossed leather patch, embroidery or screen print; front, side or back of the crown.
• Thickness — 3 mm standard; 2 mm for a lighter hat, 4 mm for colder rooms and for markets that sell felt by weight.
• Hem — pinked as standard; a plain cut with a taped or stitched binding can be specified where a softer edge is preferred.
• Size — one size, or two-size grading from 300 pcs, packed and labelled by size for venue issue.
• Packing — kraft hang tag, cotton drawstring pouch, printed retail box, or a venue card with your rules printed on the back.

Built for banya and sauna venues, spa hotels and wellness retreats, onsen and hammam operators, sauna equipment distributors, and gift and homeware retailers adding a felt sauna range.

What buyers get from us

• Direct manufacturer — pressing, hem cutting, hole punching, loop stitching and logo all run in one workshop, so a thickness change or a new hem finish does not wait on an outside finisher.
• Low minimum, 100 pcs per colour — enough to test one shade with a single venue or on one retail shelf, and colours can be mixed in the same order.
• Custom-built, not re-labelled — thickness, hem finish, loop size, size grading and label set are made to your range rather than taken from a stock hat with your logo added.
• Wholesale tiers — price breaks at 500, 1,000 and 3,000 pcs for importers, hotel groups and brand owners, with consolidated shipping on mixed colour orders.

Send us your logo file, target colours and the head size you issue. We confirm the felt thickness, hem finish and logo method, then send a quotation with a pre-production sample for your approval. Minimum starts at 100 pcs per colour.