Plain bell-shaped wool felt sauna hats for banya venues, spa hotels, gift retailers and promotional buyers who want a blank shell to brand. The hat is pressed in one piece and finished with a clean cut hem — no hanging loop, no vent holes, no binding — so the whole surface stays available for print or embroidery. Custom logo from 100 pcs per colour.
- Blank shell, full print area — with no loop, no punched holes and no stitched binding to work around, artwork can run across the side of the crown or wrap round the front. Useful for a large one-colour logo or a full-wrap print that would otherwise be broken up by hardware.
- One-piece pressed bell — shaped in a single mould rather than sewn from panels, so there is no crown seam sitting against the head and no stitching to fail after repeated steaming.
- 100% feltro di lana, 3 mm — dense enough to hold its shape in a hot room and thick enough to keep insulating once damp. No synthetic blend, so the hat can go from a 90 °C bench to a cold rinse without warping.
- Clean cut hem — a straight edge rather than a pinked zigzag, which keeps the silhouette sharp and stacks flat in a box. It can be left raw, as here, or finished with a binding if your market prefers a softer edge.
- Six stock colours — nero, dark brown, taupe, light grey, oatmeal and cream. Dark shades suit venue issue, light shades suit retail and gifting; all six can be mixed in one order from 100 pcs per colour.
- One size, fino a 61 cm — the felt has enough give to fit most adult heads. Two-size grading (56–58 / 59–61 cm) is available from 300 pcs for venues that hand out hats by size.
- Logo personalizzato — serigrafia, trasferimento di calore, ricamo, felt patch or debossed leather patch. Samples in 5–7 giorni, bulk in 15–25 days after approval.
Specifiche
| Materiale | 100% feltro di lana |
| Thickness | 3 mm (2 mm / 4 mm on request) |
| Forma | Bell, one-piece pressed, no crown seam, plain shell |
| Hem | Straight cut, unbound (binding on request) |
| Dimensioni della testa | One size, fino a 61 cm; 56–58 / 59–61 cm grading from 300 pz |
| Colori | Nero, dark brown, taupe, light grey, oatmeal, cream; custom Pantone from 300 pz |
| Logo | Screen print, trasferimento di calore, ricamo, felt patch or debossed leather patch |
| Imballaggio | Polybag / kraft hang tag / cotton drawstring pouch / retail box |
| Minimum order | 100 pcs per colour, mixed colours accepted |
| Tempi di consegna | Samples 5–7 giorni, bulk 15–25 days after approval |
| Care labelling | Printed to destination market rules (FTC / EU 1007/2011) |
What you can change
- Colour — six shades in stock; Pantone-matched dyeing from 300 pcs per shade.
- Logo — serigrafia, trasferimento di calore, ricamo, felt patch or leather patch; anteriore, lato, Indietro, or a full wrap round the crown.
- Thickness — 3 mm standard; 2 mm for a lighter hat, 4 mm for colder rooms and for markets that sell felt by weight.
- Hem — straight cut as standard; a bound edge can be specified where a softer finish is wanted.
- Misurare — one size, or two-size grading from 300 pz, packed and labelled by size.
- Imballaggio — kraft hang tag, cotton drawstring pouch, printed retail box, or a venue card with your rules printed on the back.
Built for banya and sauna venues, spa hotels and wellness retreats, gift and homeware retailers, private-label brands building a felt range, and promotional wholesalers who need a blank hat for event branding.
What buyers get from us
- Direct manufacturer — pressing, hem cutting, logo application and packing all run in one workshop, so a thickness change or a new colour does not wait on an outside finisher.
- Low minimum, 100 pcs per colour — enough to test one shade with a single venue or on one retail shelf, and the six stock colours can be mixed in the same order.
- Custom-built, not re-labelled — thickness, hem finish, size grading and label set are made to your range rather than taken from a stock hat with your logo added.
- Wholesale tiers — price breaks at 500, 1,000 E 3,000 pcs for importers, hotel groups and brand owners, with consolidated shipping on mixed colour orders.
Send us your logo file, target colours and the head size you issue. We confirm the felt thickness, hem finish and logo method, then send a quotation with a pre-production sample for your approval. Minimum starts at 100 pcs per colour.